PCS 7 TeleControl Operator System . Дизайн. Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на PCS 7 TeleControl Operator System

| | | |

PCS 7 TeleControl Operator System

PCS 7 TeleControl OS servers and PCS 7 TeleControl OS single stations can integrate both local SIMATIC PCS 7 automation systems and widely distributed outstations (RTUs) of a telecontrol system into the process control.

Depending on the configuration of a PCS 7 TeleControl operator system as single station or client/server combination (single or redundant), the following software components are required:

Required software		SIMATIC PCS 7 architecture
		OS single station	Client - server
		OS single station	Client	Server not redundant	Server redundant
PCS 7 OS Software Single Station	See Catalog ST PCS 7, section "Operator System", "OS software"	?	–	–	–
PCS 7 OS Software Server		–	–	?	–
PCS 7 OS Software Server Redundancy		–	–	–	?
PCS 7 OS Software Client		–	?	–	–
PCS 7 TeleControl OS Runtime		?	–	?	? (2 licenses)
PCS 7 TeleControl Driver (alternative)	SINAUT	?	–	?	? (2 licenses)
	DNP3	?	–	?	? (2 licenses)
	IEC 60870-5-101/-104	?	–	?	? (2 licenses)
	Modbus RTU	?	–	?	? (2 licenses)
	S7 EDC	?	–	?	? (2 licenses)

Ordering data for SIMATIC PCS 7 OS Runtime licenses for expanding the OS Runtime POs (single station/server) and additional SIMATIC PCS 7 OS software components for PCS 7 TeleControl Operator Systems can be found in Catalog ST PCS 7, Chapter "Operator system", section "OS software".

SIMATIC PCS 7 Industrial Workstations suitable as basic hardware for configuration of an operator station as PCS 7 TeleControl OS single station, PCS 7 TeleControl OS server or PCS 7 TeleControl OS client can be found in Catalog ST PCS 7, section "Industrial Workstation/PC".

PCS 7 TeleControl OS software for single station, server and redundant server

The software product PCS 7 TeleControl OS Runtime contains the PCS 7 TeleControl OS software including the object library with the PCS 7 TeleControl OS faceplates and symbols as well as the Runtime license for operation on an OS single station or OS server.

An additional PCS 7 TeleControl Driver license is required for each telecontrol protocol used (SINAUT, DNP3, IEC 60870?5?101/?104, Modbus RTU, S7 EDC) per PCS 7 TeleControl OS single station and per PCS 7 TeleControl OS server.

The SIMATIC PCS 7 OS software must be ordered separately. In the ST PCS 7 catalog, you can find the SIMATIC PCS 7 OS software for OS single station and OS server in section "Operator system", "OS software", and the SIMATIC PCS 7 OS software for a redundant OS server pair in the section "Operator system", "OS software".

Upgrade

Existing SIMATIC PCS 7 TeleControl OS Runtime Software V8.0 and V8.1 can be upgraded to V8.2 using the SIMATIC PCS 7 TeleControl Upgrade Package. This Upgrade Package is also suitable for upgrading the SIMATIC PCS 7 TeleControl OS Engineering Software V8.0 and V8.1. SIMATIC PCS 7 ES and OS software V8.0 or V8.1 should be upgraded to V8.2 using separate upgrade packages from the ST PCS 7 catalog, sections "Upgrades for engineering system" and "Upgrades for operator system".