Junction units are available:

• as an L-enclosure without or with configurable angle
• As Z-enclosure
• As T-enclosure
• As K-enclosure
• As a moving junction unit up to 800 A.
• Types of construction edgewise or flat

Features

Protected to IP52 degree of protection as standard. This can be increased to IP54 or IP55 with additional parts.

Flexible copper leads for flexible junction unit enclosures.

The L-enclosures with configurable angle are available with a fixed angle of 90° or any angle in 5° increments from 85° to 175°.

All L- and Z-enclosures are available with

• standard side lengths of 0.36 m
• one or two optional side lengths of 0.36 m to 1.25 m.

The junction unit enclosures are supplied with 1 terminal block.

Flexible junction units

No mounting possible on the infeed; not upgradable to IP55.

BD2-...-R

L-enclosures

Left: Knee, rear; BD2.-...-LH, BD2.-...-LH-X*, BD2.-...-LH-Y*, BD2.-...-LH-X*/Y*
Right: Knee, front; BD2.-...-LV, BD2.-...-LV-X*, BD2.-...-LV-Y*, BD2.-...-LV-X*/Y*

Left: Elbow, right; BD2.-...-LR, BD2.-...-LR-X*, BD2.-...-LR-Y*, BD2.-...-LR-X*/Y*
Right: Elbow, left; BD2.-...-LL, BD2.-...-LL-X*, BD2.-...-LL-Y*, BD2.-...-LL-X*/Y*

Z-enclosures

Left: BD2.-...-ZH-Z*, BD2.-...-ZH-X*/Y*/Z* (rear)
Right: BD2.-...-ZV-Z*, BD2.-...-ZV-X*/Y*/Z* (front)

Left: BD2.-...-ZR-Z*, BD2.-...-ZR-X*/Y*/Z* (right)
Right: BD2.-...-ZL-Z*, BD2.-...-ZL-X*/Y*/Z* (left)

T-enclosures

Left: BD2.-...-TH (rear)
Right: BD2.-...-TV (front)

Left: BD2.-...-TR (right)
Right: BD2.-...-TL (left)

K-enclosures

Left: BD2.-...-KVH (front + rear)
Right: BD2.-...-KRL (right + left)

L-enclosures with engineered angle from 85° to 175°

Left: Knee, rear; BD2.-...-LH-G*, BD2.-...-LH-X*-G*, BD2.-...-LH-Y*-G*, BD2.-...-LH-X*/Y*-G*
Right: Knee, front; BD2.-...-LV-G*, BD2.-...-LV-X*-G*, BD2.-...-LV-Y*-G*, BD2.-...-LV-X*/Y*-G*

Left: Elbow, right; BD2.-...-LR-G*, BD2.-...-LR-X*-G*, BD2.-...-LR-Y*-G*, BD2.-...-LR-X*/Y*-G*
Right: Elbow, left; BD2.-...-LL-G*, BD2.-...-LL-X*-G*, BD2.-...-LL-Y*-G*, BD2.-...-LL-X*/Y*-G*