Mode of operation and design

Measuring principle

Electromagnetic with pulsed constant field

Empty pipe

Detection of empty pipe (special cable required in remote mounted installation)

Excitation frequency

Depend on sensor size

Electrode input impedance

> 1 x 10¹⁴ ?

Input

Digital input

11 … 30 V DC, Ri = 4.4 k?

• Activation time

50 ms

• Current

I_11 V DC = 2.5 mA, I_{30 V DC} = 7 mA

Output

Current output

• Signal range

4 … 20 mA (active/passive)

• Load

< 560 ?

• Time constant

0.1 … 30 s, adjustable

Digital output

• Frequency

0 … 10 kHz, 50 % duty cycle (uni-/bidirectional)

• Time constant

0.1 … 30 s, adjustable

• Pulse (passive)

3 … 30 V DC, max. 110 mA (30 mA Ex version), 200 ? ? Ri ? 10 k? (powered from connected equipment)

• Time constant

0.1 … 30 s, adjustable

Relay output

• Time constant

Changeover relay, same as current output

• Load

42 V AC/2 A, 24 V DC/1 A

Low flow cut off

0 … 9.9 % of maximum flow

Galvanic isolation

All inputs and outputs are galvanic isolated.

Max. measuring error

MAG 6000 I/MAG 6000 I Ex (incl. sensor)

± 0.2 % ± 1 mm/s

Rated operation conditions

Ambient temperature

• Operation

• MAG 6000 I

-20 … +60 °C (-4 … +140 °F)

• MAG 6000 I Ex

-20 … +60 °C (14 … 140 °F)

• Storage

-40 … +70 °C (-40 … +158 °F)

Mechanical load

18 … 1000 Hz random in x, y, z, directions for 2 hours according to EN 60068-2-36

Transmitter: 1.14 g RMS

Degree of protection

IP67/NEMA 4X to IEC 529 and DIN 40050 (1 mH₂O 30 min.)

EMC performance

IEC/EN 61326-1 (all environments)
IEC/EN 61326-2-5
NAMUR NE 21

Display and keypad

Totalizer

Two eight-digit counters for forward, net or reverse flow

Display

Background illumination with alphanumeric text, 3 x 20 characters to indicate flow rate, totalized values, settings and faults; Reverse flow indicated by negative sign

Keypad

Capacitive touch keypad with LED light for feedback indication

Time constant

Time constant as current output time constant

Design

Enclosure material

Die cast aluminum, with corrosion resistant Basic Polyester powder coating (min. 60 µm)

• Wall mounting

Wall mounting bracket enclosed for remote version

Dimensions

See dimensional drawings

Weight

See dimensional drawings

Power supply

• Standard transmitter: 18 … 90 V DC; 115 … 230 V AC; 50 … 60 Hz

• Ex transmitter: 18 … 30 V DC

• Ex transmitter: 115 … 230 V AC; 50 … 60 Hz

• Ex transmitter NAMUR: 18 … 30 V DC; 115 … 230 V AC; 50 … 60 Hz

Power consumption

• 230 V AC: 20 VA

• 24 V DC: 9.6 W, I_N = 0.4 A, I_ST = 1 A (3 ms)

Certificates and approvals

General purpose

• CE (LVD, EMC, PED, RoHS)

Hazardous areas

• ATEX, IECEx, FM, CSA, EAC Ex, NEPSI
  • Zone 1 Ex d e [ia] ia IIC T6 Gb
• ATEX, IECEx, CSA
  • Zone 21 Ex tD A21 IP67 T85 °C
• FM
  • XP IS Class I Div. 1 Groups A, B, C, D
  • DIP Class II+III Div. 1 Groups E, F, G

Others

• CMC/CPA (China)
• C-TICK (Australia and New Zealand EMC)
• EAC (Russia, Belarus, Kazakhstan)
• KCC (South Korea)

Cable entries

MAG 6000 I

2 x M25 (for supply/output) and
2 x M16 (for sensor connection) or
2 x ?" NPT (for supply/output) and
2 x M16 (for sensor connection)

MAG 6000 I Ex ATEX 2G D

2 x M20 (for supply/output) and
2 x M16 (for sensor connection)

Communication

Standard versions

HART, Modbus RTU/RS 485, FOUNDATION Fieldbus H1, DeviceNet, PROFIBUS PA, PROFIBUS DP add-on modules

Ex versions

HART, PROFIBUS PA (not for Ex version)