SIMATIC ET 200S Compact

• Extended block I/O with IP20 degree of protection and 32 integrated channels, comprising of terminal block and electronic block
• 2 variants: 32 DI or 16 DI/16 DO
• Finely scalable expansion to a maximum of 128 channels or 12 modules
• The complete SIMATIC ET 200S module spectrum can be used (with the exception of PROFIsafe modules and reserve modules)
• Minimal width supports installation in particularly small, compact terminal boxes
• Separation of connections and electronics with permanent wiring
• Screw-type and spring-loaded terminal connections
• Standard terminal block with 2-wire connection system; 3-wire and 4-wire systems available using optional add-on terminals
• Installation on a DIN rail
• Hot swapping of expansion modules
• Communication via PROFIBUS
• Up to 100 bytes inputs and outputs (address space)
• The system characteristics meet high machine and plant availability requirements.
• SIMATIC ET 200 Configurator software for designing the SIMATIC ET 200S Compact and creating order lists

SIMATIC ET 200S

• Distributed I/O system with IP20 degree of protection with minimal wiring
• Can be used with integrated SIMATIC S7?CPU as mini PLC:
  • also available as a fail-safe PROFIsafe version
  • with optional lower-level PROFIBUS DP
• Finely modular design for adaptation to the automation task at hand.
• Interface modules available with PROFIBUS DP or PROFINET interfaces
• PROFINET modules with integrated 2-port switch for a line topology
• The optimum solution for extremely time-critical tasks
  • Cycle times down to 250 ?s based on PROFINET IO with Isochronous Real-Time (IRT)
  • Short terminal-to-terminal times through High Speed analog modules with conversion times of ? 20 ?s per channel
• Combine digital and analog input or output modules, technology modules, motor starters and frequency converters
• Modules can be replaced during operation (hot swapping)
• Channel-specific diagnostics for high availability
• Can be supplied with integrated fiber optic interface if required
• Transfer rate up to 12 Mbit/s (PROFIBUS) or 100 Mbit/s (PROFINET)
• Flexible connection method (2/3/4-wire connections as screwtype and spring-loaded terminals and FastConnect which requires no insulation stripping)
• Variable potential groups through power modules
• Option handling with or without reserve modules
• SIMATIC ET 200 Configurator software for designing the SIMATIC ET 200S and creating order lists