Lighting control configurable as fully automatic or semi-automatic
Cyclical sending or sending on change of value of the measured brightness value (Lux)
Presence detection for three function blocks (presence detector, motion detector, and HVAC detector)
Two per function block selectable functions (A, B) on start of the presence detection and two per function block selectable functions (C, D) on expiration of the presence detection
Configurable delay of 0…255 seconds between sending of function A and B respectively C and D
Selection per function (A, B, C, D) switching On/Off, 8-bit value, 16-bit value, temperature value, brightness value, 8-bit scene control
Per function block configurable overshoot time, in each case configurable as a fixed time, as switchable between two times via the bus, or settable to a value via the bus
Parallel operation of several presence detectors (master-slave, master-master) without additional logic module
Functions of the IR remote control selectable per pair of pushbuttons or per each single pushbutton of a button pair
Per pushbutton selectable function toggle, switching on, switching off, 8-bit scene recall, 8-bit value, 16-bit value, temperature value, brightness value
For each pair of pushbuttons selectable function switching On/Off, 2-button dimming with stop telegram, 2-button solar protection control, variable 8-bit value, 8-bit scene control
Blocking object for IR decoder
Test mode for easy start-up
LED for display of detected movements in test mode
