UP 258E.. - Presence detector / Motion detector with constant light level control
UP 258E..
Presence detector / Motion detector with constant light level control
Passive infrared detector for ceiling mounting indoors
Optional blinding of parts of the detection area
Mixed light measurement
Cyclical sending or sending on change of value of the measured brightness value (Lux)
Integrated two-position controller
Constant light level control for a main group of luminaries and up to four additional groups of luminaries
Lighting control configurable as fully automatic or semi-automatic
Motion detection for three function blocks (presence detector, motion detector, and HVAC detector)
2 per function block selectable functions (A, B) on start of the presence detection and two per function block selectable functions (C, D) on expiration of the presence detection
Configurable delay of 0…255 seconds between sending of function A and B respectively C and D
Selection per function (A, B, C, D) switching On/Off, 8-bit value, selectable 8-bit value, 16-bit value, temperature value, brightness value, 8-bit scene control
Blocking object per function block
Per function block configurable overshoot time, in each case configurable as a fixed time, as switchable between two times via the bus, or settable to a value via the bus
Parallel operation of several presence detectors (master-slave, master-master) without additional logic module
Integrated IR receiver and IR decoder for IR remote controls with six pairs of pushbuttons
Functions of the IR remote control selectable per pair of pushbuttons or per each single pushbutton of a button pair
Per pushbutton selectable function toggle, switching on, switching off, 8-bit scene recall, 8-bit value, 16-bit value, temperature value, brightness value
For each pair of pushbuttons selectable function switching On/Off, 2-button dimming with stop telegram, 2-button solar protection control, variable 8-bit value, 8-bit scene control
Blocking object for IR decoder
Test mode for easy start-up
LED for display of detected movements in test mode, to be configured using ETS
Integrated bus coupling unit, bus connection via bus terminal, Power supply over the bus line
Ceiling mounting on a flush-mounting box with 60 mm diameter and min. 40 mm depth or in a housing for surface-mounting (to be ordered separately)
