Type of motor | SIMOTICS FD IEC low-voltage motors |
Frame sizes | 315, 355 |
Rated output | 125 … 895 kW |
Rated speed | 750 ... 3600 rpm |
Rated torque | 610 … 4586 Nm |
Versions | Air-cooled, enclosed version - with self-ventilation
- with forced-air cooling
Water-cooled version - with water-jacket cooling
- with heat exchanger
Air-cooled, open version - with self-ventilation
- with forced-air cooling
|
Efficiency marking | For motors in mains-fed operation only
Efficiency class in accordance with IEC 60034-30: IE2, IE3 (4- and 6-pole) |
Insulation of the stator winding
according to EN 60034-1 (IEC 60034-1) | Temperature class 180 (H)
DURIGNIT IR 2000 insulation system |
Degree of protection
according to EN 60034-5 (IEC 60034-5) | As standard IP55/IP54 Air-cooled, enclosed version; water-cooled version
IP23 Air-cooled, open version |
Cooling according to EN 60034-6 (IEC 60034-6) | - Self-ventilated 1LM1 motors (IC411)
- Forced-air cooled 1LQ1 motors (IC416)
- Water-cooled 1LH1 motors (IC71W)
- Air-water heat exchanger – 1LN1 motors (IC86W)
- Self-ventilated, open-circuit ventilated 1LL1 motors (IC01)
- Forced-air cooled, open-circuit ventilated 1LP1 motors (IC06)
|
Admissible coolant temperature and site altitude | As standard -20 ... +40 °C, site altitude up to 1000 m above sea level. |
Standard voltages
according to EN 60038 (IEC 60038) | VSD: 50 Hz systems: 400 V, 500 V, 690 V
60 Hz systems: 460 V and 575 V
DOL: 50 Hz systems: 400 V and 690 V 60 Hz systems: 460 V The voltage to be used can be found in the "Selection and ordering data" for the required motor |
Type of construction
according to EN 60034?7 (IEC 60034?7) | - Without flange: IM B3
- With flange: IM B35, IM V1
|
Paint finish
Suitability of paint finish for climate group according to IEC 60721, Part 2-1 | Standard: color RAL 7030 stone gray |
Vibration quantity level
according to EN 60034-14 (IEC 60034-14) | Level A (normal)
Optionally: level B (with special vibration requirements) |
Shaft extension
according to DIN 748 (IEC 60072) | Balance type: half-key balancing as standard |
Sound pressure level
according to EN ISO 1680 (tolerance +3 dB) | The sound pressure level is listed in the selection and ordering data for the required motor. |
Weights | The weight is listed in the selection and ordering data for the required motor |
Modular mounting concept | Prepared for mounting of rotary pulse encoder or brake |
Options | See "Supplements to article numbers and special versions" |
