PM330 Power Modules . Технические данные. Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на PM330 Power Modules

| | | | | |

PM330 Power Modules

General technical specifications

	PM330 Power Modules
Input data
Line voltage	380 ... 480 V ±10 % 3 AC
Starting current	< rated input current (refer to power-dependent data)
Input frequency	47 ... 63 Hz
Grid requirement Short-circuit power R_SC	>33 line reactor required
Output data
Output voltage	0 V 3 AC … ? (line voltage ? 0.97)
Output current	See power-dependent data
Output frequency	0 ... 100 Hz
Pulse frequency	Self-adjusting up to 4 kHz
Power factor ?	0.75 ... 0.93
Offset factor cos ?	0.96
Further technical specifications
Overvoltage category to IEC 61800?5?1	Overvoltage category III: Supply circuits Overvoltage category II: Non-supply circuits
Braking methods	DC braking Dynamic braking with external Braking Module with braking resistor
Type of cooling	Forced air cooling AF to EN 60146
Protection functions	Undervoltage Overvoltage Overcurrent/overload Ground fault Short-circuit Stall protection Motor blocking protection Motor overtemperature Inverter overtemperature/fan failure Parameter locking Detection of single-phase motor cable break Line phase failure
Standards
Compliance with standards	cULus (File No.: E192450), CE, C-Tick, GOST?R (EAC), KC
CE marking	According to EMC Directive No. 2004/108/EC and Low-Voltage Directive No. 2006/95/EC
RI suppression	According to EMC product standard for variable-speed drives EN 61800?3, "second environment". Can be operated in the "first environment" if line filters are installed.

PM330 Power Modules

Line voltage 380 ... 480 V 3 AC		PM330 Power Modules
		6SL3310-1PE33-0AA0	6SL3310-1PE33-7AA0	6SL3310-1PE34-6AA0	6SL3310-1PE35-8AA0	6SL3310-1PE36-6AA0	6SL3310-1PE37-4AA0
Rated power ¹⁾
Based on the base-load current I_L
At 400 V/50 Hz	kW	160	200	250	315	355	400
At 460 V/60 Hz	hp	200	250	300	400	450	500
Based on the base-load current I_H
At 400 V/50 Hz	kW	132	160	200	250	250	315
At 460 V/60 Hz	hp	150	200	200	300	300	350
Output current at 50 Hz 3 AC
Rated current I_rated (400 V ±10 %)	A	300	370	460	585	655	735
Rated current I_rated (480 V ±10 %)	A	245	308	369	487	526	602
Base-load current I_L (400 V ±10 %) ²⁾	A	290	360	450	570	640	720
Base-load current I_L (480 V ±10 %) ²⁾	A	240	302	361	477	515	590
Base-load current I_H (400 V ±10 %) ³⁾	A	240	296	368	468	491	551
Base-load current I_H (480 V ±10 %) ³⁾	A	196	247	295	390	394	452
Max. output current I_max	A	392	486	608	770	864	972
Rated pulse frequency	kHz	2	2	2	2	2	2
Input current ⁴⁾
Rated current I_rated (400 V ±10 %)	A	317	375	469	597	668	750
Rated current I_rated (480 V ±10 %)	A	262	314	376	497	536	614
Base-load current I_L (400 V ±10 %) ²⁾	A	307	365	459	585	654	735
Base-load current I_L (480 V ±10 %) ²⁾	A	257	308	368	486	525	602
Base-load current I_H (400 V ±10 %) ³⁾	A	254	300	375	477	501	562
Base-load current I_H (480 V ±10 %) ³⁾	A	210	251	301	397	402	461
Max. input current	A	415	493	620	785	881	992
Short-circuit current rating per IEC, in conjunction with the specified fuses	kA	100	100	100	100	100	100
Rated short-circuit current SCCR (Short Circuit Current Rating) in accordance with UL508C (up to 600 V), in conjunction with the specified fuses	kA	100	100	100	100	100	100
Minimum short-circuit current ⁵⁾
For 3NE1 fuses	A	4400	5200	6300	9000	10000	12000
For 3NA3 fuses	A	9500	14000	20000	20000	30000	30000
Efficiency ? At rated current I_rated (400 V/40 °C)		0.98	0.98	0.981	0.981	0.98	0.981
Power loss At rated current I_rated (400 V/40 °C)	kW (hp)	3.642	4.414	5.125	6.791	7.687	8.385
Coolant requirements	m³/s (ft³/s)	0.21	0.21	0.21	0.36	0.36	0.36
Coolant		of air	of air	of air	of air	of air	of air
Sound pressure level L_pA (1 m)	dB	74	74	74	74	74	74
Power requirement 24 V DC supply	A	0.5	0.5	0.5	0.5	0.5	0.5
Line supply connection U1/L1, V1/L2, W1/L3		M12 screw	M12 screw	M12 screw	M12 screw	M12 screw	M12 screw
Conductor cross section, max. (IEC)	mm²	2 ? 240	2 ? 240	2 ? 240	4 ? 240	4 ? 240	4 ? 240
Motor connection U2, V2, W2		M12 screw	M12 screw	M12 screw	M12 screw	M12 screw	M12 screw
Conductor cross section, max. (IEC)	mm²	2 ? 240	2 ? 240	2 ? 240	4 ? 240	4 ? 240	4 ? 240
DC link connection DCP, DCN		M12 screw	M12 screw	M12 screw	M12 screw	M12 screw	M12 screw
Conductor cross section, max. (IEC)	mm²	2 ? 240	2 ? 240	2 ? 240	4 ? 240	4 ? 240	4 ? 240
PE/GND connection		M12 screw	M12 screw	M12 screw	M12 screw	M12 screw	M12 screw
Conductor cross section, max. (IEC)	mm²	3 ? 240	3 ? 240	3 ? 240	6 ? 240	6 ? 240	6 ? 240
Cable length, max. between Power Module and motor
When compliant with categories C2 and C3 according to EN 61800-3 shielded	m (ft)	100	100	100	100	100	100
When non-compliant with the limit values for RI suppression and without output reactor or dv/dt filter unshielded	m (ft)	200	200	200	200	200	200
When non-compliant with the limit values for RI suppression with output reactor or dv/dt filter shielded/unshielded	m (ft)	300/450	300/450	300/450	300/450	300/450	300/450
Degree of protection		IP20	IP20	IP20	IP20	IP20	IP20
Dimensions
Width	mm (in)	452	452	452	548	548	548
Height	mm (in)	1447	1447	1447	1696	1696	1696
Depth	mm (in)	327.5	327.5	327.5	393	393	393
Frame size		GX	GX	GX	HX	HX	HX
Weight, approx.	kg (lb)	101	102	107	155	155	157
Minimum size of control cabinet for installation of a Power Module
Width	mm (in)	No specifications	No specifications	No specifications	800	800	800
Height	mm (in)	No specifications	No specifications	No specifications	2000	2000	2000
Depth	mm (in)	No specifications	No specifications	No specifications	600	600	600

¹⁾ Rated power of a typical 4-pole standard induction motor based on the base-load current I_L or I_H at 400 V 3 AC/50 Hz (kW) or 460 V 3 AC/60 Hz (hp).

²⁾ The base-load current I_L is based on the duty cycle for low overload (LO).

³⁾ The base-load current I_H is based on the duty cycle for high overload (HO).

⁴⁾ The input current depends on the motor load and line impedance and applies for a line impedance corresponding to u_K = 1 %. The rated input currents apply for a load at rated power (based on I_rated) – these current values are specified on the rating plate.

⁵⁾ 10 ms value from current-time characteristic for reliable tripping of installed protection devices.

Note:

If the minimum short-circuit current is not reached, the activation time of the fuses is increased, which can lead to damage.