SIPLUS S7-300 SM 336 F analog input modules - Safety Integrated . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на SIPLUS S7-300 SM 336 F analog input modules

| | | | | |

SIPLUS SM 336 F analog input module - Safety Integrated

Order number		6AG1336-4GE00-4AB0
		SIPLUS S7-300 SM336 6AE F
General information
Product type designation		SM 336 F-AI 6x0/4 to 20 mA HART
Supply voltage
Rated value (DC)		24 V
Reverse polarity protection		Yes
Input current
From power supply L+, typ.		150 mA
from backplane bus 5 V DC, max.		90 mA
Power loss
Power loss, typ.		4.5 W
Analog inputs
Number of analog inputs		6
permissible input current for current input (destruction limit), max.		40 mA
Input ranges (rated values), currents
? 0 to 20 mA		Yes
? 4 mA to 20 mA		Yes
Cable length
? shielded, max.		1 000 m
Analog value generation for the inputs
Integration and conversion time/resolution per channel
? Resolution with overrange (bit including sign), max.		16 bit; 15 bits + sign
? Integration time (ms)		20 ms @ 50 Hz, 16.7 ms @ 60 Hz
? Interference voltage suppression for interference frequency f1 in Hz		f=n x (f1+-0.5%)
Encoder
Connection of signal encoders
? for current measurement as 2-wire transducer		Yes
? for current measurement as 4-wire transducer		Yes
Errors/accuracies
Operational error limit in overall temperature range
? Current, relative to input area, (+/-)		0.2 %; 40 µA
Basic error limit (operational limit at 25 °C)
? Current, relative to input area, (+/-)		0.1 %
Interrupts/diagnostics/status information
Alarms
? Diagnostic alarm		Yes
Diagnostic messages
? Diagnostic information readable		Yes
Potential separation
Potential separation analog inputs
? between the channels		Yes
? between the channels and backplane bus		Yes
? between the channels and the power supply of the electronics		Yes
Isolation
Isolation tested with		370V for 1 min
Standards, approvals, certificates
CE mark		Yes
UL approval		Yes; File E239877
FM approval		Yes
RCM (formerly C-TICK)		Yes
KC approval		Yes
EAC (formerly Gost-R)		Yes
Highest safety class achievable in safety mode
? acc. to EN 954		4
? SIL acc. to IEC 61508		SIL 3
Ambient conditions
Ambient temperature during operation
? min.		0 °C; = Tmin
? max.		60 °C; = Tmax
Extended ambient conditions
? relative to ambient temperature-atmospheric pressure-installation altitude		Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m)
Relative humidity
— With condensation, tested in accordance with IEC 60068-2-38, max.		100 %; RH incl. condensation/frost (no commissioning under condensation conditions)
Resistance
— against biologically active substances / conformity with EN 60721-3-3		Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!
— against chemically active substances / conformity with EN 60721-3-3		Yes; Class 3C4 (RH < 75%) incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!
— against mechanically active substances / conformity with EN 60721-3-3		Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Connection method
required front connector		20-pin
Dimensions
Width		40 mm
Height		125 mm
Depth		120 mm
Weights
Weight, approx.		350 g