SIPLUS S7-400 SM 422 digital output modules . Технические данные . Подробное описание, цены на оборудование Siemens. Большой выбор, низкие цены на SIPLUS S7-400 SM 422 digital output modules

| | | | | | |

SIPLUS S7-400 SM 422 digital output modules

Order number		6AG1422-1BL00-2AA0
		SIPLUS S7-400 SM422 32DA
Supply voltage
Load voltage L+
? Rated value (DC)		24 V
? permissible range, lower limit (DC)		20.4 V
? permissible range, upper limit (DC)		28.8 V
Input current
from load voltage L+ (without load), max.		30 mA
from backplane bus 5 V DC, max.		200 mA
Power loss
Power loss, typ.		4 W
Digital outputs
Number of digital outputs		32
Limitation of inductive shutdown voltage to		-27 V
Switching capacity of the outputs
? on lamp load, max.		5 W
Output voltage
? for signal "1", min.		L+ (-0.3 V)
Output current
? for signal "1" rated value		0.5 A
? for signal "1" permissible range, min.		5 mA
? for signal "1" permissible range, max.		0.6 A
? for signal "0" residual current, max.		0.3 mA
Switching frequency
? with resistive load, max.		100 Hz
? with inductive load, max.		0.5 Hz
Total current of the outputs (per group)
all mounting positions
— up to 60 °C, max.		2 A; 8 adjacent outputs each
Cable length
? shielded, max.		1 000 m
? unshielded, max.		600 m
Potential separation
Potential separation digital outputs
? between the channels, in groups of		32
? between the channels and backplane bus		Yes
Isolation
Isolation tested with		500 V DC
Ambient conditions
Ambient temperature during operation
? min.		-25 °C; = Tmin
? max.		60 °C; = Tmax
Extended ambient conditions
? relative to ambient temperature-atmospheric pressure-installation altitude		Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)
Relative humidity
— With condensation, tested in accordance with IEC 60068-2-38, max.		100 %; RH incl. condensation/frost (no commissioning under condensation conditions)
Resistance
— against biologically active substances / conformity with EN 60721-3-3		Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna). The supplied connector covers must remain on the unused interfaces during operation!
— against chemically active substances / conformity with EN 60721-3-3		Yes; Class 3C4 incl. salt spray according to EN 60068-2-52 (degree of severity 3). The supplied connector covers must remain on the unused interfaces during operation!
— against mechanically active substances / conformity with EN 60721-3-3		Yes; Class 3S4 incl. sand, dust. The supplied connector covers must remain on the unused interfaces during operation!
Dimensions
Width		25 mm
Height		290 mm
Depth		210 mm
Weights
Weight, approx.		600 g