General technical data: | | |
Type of power output / connectable | | LA724I / LA724I HP / LA724I SSR |
Power supply: | | |
Type of voltage / of the supply voltage | | AC |
Supply voltage / with AC / Rated value | V | 230 |
Relative negative tolerance / of the supply voltage | % | 18 |
Relative positive tolerance / of the supply voltage | % | 15 |
Supply voltage frequency | | |
| Hz | 50 |
| Hz | 60 |
Relative symmetrical tolerance / of the supply voltage frequency | % | 5 |
Active power consumption | W | 35 |
Buffering time / in the event of power failure | ms | 20 |
Recovery time / after power failure / typical | s | 1 |
Type of electrical connection / for supply voltage | | Terminal, 2-pole |
Type of connectable conductor cross-section | | |
| | |
| | 1x (0.5 ... 2.5 mm?) |
| | 1x (0.5 ... 2.5 mm?) |
| | 26 ... 14 |
Communication: | | |
Protocol / is supported / PROFIBUS DP protocol | | Yes |
Transfer rate / with PROFIBUS DP / maximum | Mbit/s | 12 |
Type of electrical connection / of the PROFIBUS interface | | 9-pin D-Sub socket |
Number of status displays | | 2 |
Display version / as status display by LED | | LED green = status indicator, LED red = fault indicator |
Installation/ mounting/ dimensions: | | |
Width | mm | 50 |
Height | mm | 480 |
Depth | mm | 210 |
