|
| | | | | | | | | |
ENG: 2, 3 and 5-spindle valve manifolds for protective boxes
Accessory set for 2, 3 and 5-spindle valve manifolds (connection: valve manifold-pressure transmitter)
2-spindle valve manifold DN 5 with flange connection
- F12: 2 screws M10x50 to DIN EN 24 014, 2 washers, 1 O‑ring (FPM 90)
- F15: 2 screws M10x50 to DIN EN 24 014, 2 washers, 1 flat gasket
- F32: 2 screws 7/16‑20 UNF x 2 inch to ASME B 18.2.1, 1 O‑ring (FPM 90)
- F35: 2 screws 7/16‑20 UNF x 2 inch to ASME B 18.2.1, 1 flat gasket
for 3-spindle and 5-spindle valve manifold DN 5
- F14: 4 screws M10x50 to DIN EN 24 014, 4 washers, 2 O‑rings (FPM 90)
- F16: 4 screws M10x50 to DIN EN 24 014, 4 washers, 2 flat gaskets
- F34: 4 screws 7/16‑20 UNF x 2 inch to ASME B 18.2.1, 2 O‑rings (FPM 90)
- F36: 4 screws 7/16‑20 UNF x 2 inch to ASME B 18.2.1, 2 flat gaskets
Washers Ø 10.5 to DIN 125
Flat gaskets made of PTFE, max. 420 bar, 80 °C
O-ring to DIN 3771, 20 x 2.65 - S - FPM90, max. 420 bar, 120 °C
Note:Flange connection with M10 screws only permissible up to PN160!
Mounting bracket for wall mounting or for securing to mounting rack
With bolts for mounting on valve manifold
- M14: for 2-spindle valve manifold DN 5
- M17: for 3-spindle valve manifold DN 5
- M18: for 5-spindle valve manifold DN 5
Mounting clips (2 off)
- M16: For securing the mounting brackets M14, M17 and M18 to pipe
Valve manifold 100 bar, suitable for oxygen
- S12: for 2-spindle valve manifold DN 5
- S13: for 3-spindle valve manifold DN 5
- S14: for 5-spindle valve manifold DN 5
|
|
