 8GK9912-0KK00 | Cover 3NP1123... NH000 | 8GK9912-0KK00 |
 8GK9650-0KK00  8GK9711-0KK03 | Busbar supports With matching support plate | Â |
Versions | Â |
- 1-pole
- For Cu busbars 12 × 5 (10) mm, 20 × 5 (10) mm, 30 × 5 (10) mm
- Height 150Â mm
| 5SH3540 |
- 3-pole
- Busbar center-to-center spacing of 60Â mm
- For Cu busbars 12 × 5 (10) mm, 20 × 5 (10) mm, 30 × 5 (10) mm
- For bus-mounting fuse bases and 3NP4076 switch disconnectors, used together with assembly kits (mounting directly on the stays)
| 8GK9711-0KK03 |
- 4-pole
- Busbar center-to-center spacing of 60 mm
- For Cu busbars 12 × 5 (10) mm, 30 × 5 (10) mm
- Mounting internal
- Width: 20 mm
| 8US1923-4AA00 |
- 5-pole
- Busbar center-to-center spacing of 40Â mm
- For Cu busbars 12 × 5 (10) mm and for mounting 3NP fuse switch disconnectors
- Height 300 mm
| 8GK9650-0KK00 |
 8GK973. | Cu busbars | Â |
Versions | Â |
- Cu cross-section 12 × 5 mm, current 250 A
| Â |
| 8GK9731-0KK10 |
| 8GK9731-0KK20 |
| 8GK9731-0KK30 |
| 8GK9731-0KK40 |
| 8GK9731-0KK50 |
- Cu cross-section 20 × 5 mm, current 320 A
| Â |
| 8GK9733-0KK10 |
| 8GK9733-0KK20 |
| 8GK9733-0KK30 |
| 8GK9733-0KK40 |
| 8GK9733-0KK50 |
- Cu cross-section 30 × 5 mm, current 450 A
| Â |
| 8GK9735-0KK10 |
| 8GK9735-0KK20 |
| 8GK9735-0KK30 |
| 8GK9735-0KK40 |
| 8GK9735-0KK50 |
- Cu cross-section 30 × 10 mm, current 630 A
| Â |
| 8GK9736-0KK10 |
| 8GK9736-0KK20 |
| 8GK9736-0KK30 |
| 8GK9736-0KK40 |
| 8GK9736-0KK50 |
 8GK9910-0KK30 | Supports for front covers - Long version
- Material plastic
- 1 set = 4 supports
| 8GK9910-0KK30 |
 8GK9910-0KK11 | N/PE bars as plug-in terminals | Â |
Versions | Â |
- Each with 6 screw terminals from 2.5 to 16 mm2 and 21 plug-in terminals from 1.5 to 4 mm2 for mounting on longitudinal stays at a 30° inclination
| 8GK9910-0KK11 |
- With 6 screw terminals from 2.5 to 16 mm2 and 21 plug-in terminals from 1.5 to 4 mm2 for PE bar and one neutral-neutral bar each with 2 screw terminals from 2.5 to 16 mm2 and 10 plug-in terminals from 1.5 to 4 mm2 for mounting on longitudinal stays at a 30° inclination
| 8GK9910-0KK12 |
 8US1921-2AA00 | Terminals for circular conductors | Â |
Versions | Â |
| Â |
- Conductor cross-section 1.5 ... 16 mm²
| 8US1921-2AA00 |
- Conductor cross-section 1.5 ... 35 mm²
| 8US1921-2AB00 |
- Conductor cross-section 16 ... 70 mm²
| 8US1921-2AD00 |
- Conductor cross-section 16 ... 120 mm²
| 8US1921-2AC00 |
- Busbar thickness of 10 mm
| Â |
- Conductor cross-section 1.5 ... 16 mm²
| 8US1921-2BA00 |
- Conductor cross-section 1.5 ... 35 mm²
| 8US1921-2BB00 |
- Conductor cross-section 16 ... 70 mm²
| 8US1921-2BD00 |
- Conductor cross-section 16 ... 120 mm²
| 8US1921-2BC00 |
 8GK9920-0KK24 | Replacement door hinges - For wall/floor-mounted distribution boards
- 1 set = 2 hinges
| 8GK9920-0KK24 |
 8GK9910-0KK00 | Blanking strips Color RAL 7035 (light gray) | Â |
Versions | Â |
| 8GK9910-0KK00 |
- Length 1 m
without pressure-relief joint, to cut to length
| 8GK9910-0KK01 |
  | Connecting kits, IP43/IP55 - For side-by-side mounting of enclosures
- Comprising:
- Screws
- Washers
- Nuts
- 10 m roll of sealing strip
| 8GK9920-0KK31 |
Note | Â |
a bushing flange is required for electrical connections! | Â |
 8GK9910-1KK80 | Cable holders For standard mounting rails | 8GK9910-0KK80 |
 8GD9290 | Spare keys For double-bit locking mechanism | 8GD9290 |
 8GK9910-0KK34 | Extra-deep brackets For recessed installation of stand. mounting rails | 8GK9910-0KK34 |
 8GK9910-0KK26 | Quick-lock screws - Material plastic
- Color RAL 7035
| 8GK9910-0KK26 |
 8GK9910-0KK27 | Assembly tools - For supports
- Short and long version
- With ergonomic handle
| 8GK9910-0KK27 |
 8GK9918-0KK00 | Transport eyebolts
M12 | 8GK9918-0KK00 |
 8GK9910-0KK35 | Standard mounting rails, lowered | Â |
Width | Â |
| 8GK9910-0KK35 |
| 8GK9910-0KK40 |
| 8GK9910-0KK41 |
 ALPHA 400/630 stay racks for depth of 210 mm | Stay racks - For depth of 210 mm, if supporting stays are to be set forward by 55 mm
- Note: Required if standing mounting rails are mounted directly on the stays
| 8GK9910-0KK38 |
