|
| | | |
6FX8002-5YW12-.... .
- | | | PG | | | | 6FX8002-5YW12-.... | 0.34 | | . . 4X16 C, 2 X . 1,5, , UL/CSA DESINA MOTION-CONNECT 800, . .=23,6 , (M) = | |
For SIMOTICS L‑1FN3 linear motors, peak/continuous load versions, connection to SINAMICS S120 through adapter cable with full-thread connector No. of cores × cross-section | Thread | Pre-assembled adapter cable | Connector size
Interface | Pre-assembled basic cable to the drive system | Cable sold by the meter1) for
pre-assembled adapter cable | Dmax | Weight
(without connector) | Smallest perm. bending radius2) |
|---|
mm2 | | Article No.3) | | Article No. | Article No. | mm (in) | kg/m (lb/ft) | mm (in) | 4 × 2.5 | M20 | 6FX7002‑5LM42‑.... *) | 1 | 6FX80❑2‑5CS16‑.... | 6FX8008‑1BB21‑.... | 11.0 (0.43) | 0.20 (0.13) | 90 (3.54) | 4 × 2.5 | M20 | 6FX7002‑5LM62‑.... **) | 1 | 6FX80❑2‑5CS16‑.... | 6FX8008‑1BB21‑.... | 11.0 (0.43) | 0.20 (0.13) | 90 (3.54) | 4 × 4 | M32 | 6FX7002‑5LM72‑.... | 1.5 | 6FX80❑2‑5CS46‑.... ***) | 6FX8008‑1BB31‑.... | 12.3 (0.48) | 0.27 (0.18) | 100 (3.94) | 4 × 6 | M32 | 6FX7002‑5LM82‑.... | 1.5 | 6FX8002‑5CS54‑.... | 6FX8008‑1BB41‑.... | 14.9 (0.59) | 0.41 (0.28) | 120 (4.72) | 4 × 10 | M32 | 6FX7002‑5LM32‑.... | 1.5 | 6FX8002‑5CS64‑.... | 6FX8008‑1BB51‑.... | 18.2 (0.72) | 0.62 (0.42) | 140 (5.51) | 4 × 16 | M32 | 6FX7002‑5LM02‑.... | 1.5 | 6FX8002‑5CS24‑.... | 6FX8008‑1BB61‑.... | 22.3 (0.88) | 1.01 (0.68) | 170 (6.69) | MOTION‑CONNECT 700 | 7 | | | | | | | MOTION‑CONNECT 800PLUS | | | 8 | 8 | | | | Power cable | | | | | | | | Pre-assembled | | | 0 | | | | | Connector at module end supplied separately | | | 1 | | | | | Connector at module end not supplied | | | 2 | | | | | Connector at motor end supplied separately | | | 4 | | | | | Length code | .... | | .... | .... | | | |
1) Note type of delivery. 2) Valid for installation in a cable carrier. 3) The 6FX7002‑5LM.. cables comprise MOTION‑CONNECT 800PLUS cables which are sold by the meter. *) For SIMOTICS L‑1FN30/‑1FN31 motors only. **) For SIMOTICS L‑1FN33/‑1FN34/-1FN36/-1FN39motors only. ***) For SIMOTICS L‑1FN3 linear motors in the peak load version, the pre-assembled basic cable 6FX8002‑5CS54‑.... (4 × 6 mm2) to the INAMICS S120 drive system must be used.
|
|
