| |

6FX8002-2DC30-1BF.

Цена на сайте указана розничная в ЕВРО без учета НДС.
Для уточнения цены и размера предоставляемой скидки - звоните или присылайте заявки

Заказной номер	Вес	PG	Описание продукта	Цена
6FX8002-2DC30-1BF.	1.01		КАБЕЛЬ DRIVE_CLIQ В СБОРЕ ДЛЯ ПРЯМОЙ СИСТЕМЫ ИЗМЕРЕНИЯ С 24 В ШТЕКЕР RJ45, IP20 И СОЕДИНИТЕЛЬНЫЙ РАЗЪЕМ M12, IP67 MOTION CONNECT 800PLUS ТИП ГИБКИЙ, UL/CSA, DESINA ДМАКС. = 7.1 MM ДЛИНА (M)= 15	По запросу

п»ї

Couplings and clamps

Couplings

The motion control encoders are driven via a plug-in coupling or spring disk coupling. Alternatively, pulleys can also be used.

Clamps

Motion control encoders with Synchro flange can be axially mounted on the machine with screws or secured with 3 clamps.

Signal connectors as mating connectors

A signal connector is available as a mating connector for motion control encoders with flange outlet or with cable and connector.

The mating connector with 12В contacts is suitable for all incremental encoders.

The mating connector with 17В contacts is suitable for absolute encoders with EnDat.

Signal connector

signal connector is available as a replacement for motion control encoders with cable and connector.

MOTION-CONNECT DRIVE-CLiQ signal cables

Pre-assembled MOTION-CONNECT DRIVE-CLiQ signal cables with M12В plug are available as basic cables and extensions for connecting motion control encoders with DRIVE-CLiQ interface.

For further information about the signal cables, refer to MOTION-CONNECT connection systems.