| | | | | |

6ES7972-0BB12-0XA0

Цена на сайте указана розничная в ЕВРО без учета НДС.
Для уточнения цены и размера предоставляемой скидки - звоните или присылайте заявки

Заказной номер	Вес	PG	Описание продукта	Цена
6ES7972-0BB12-0XA0	0.06	250	SIMATIC DP, СОЕДИНИТЕЛЬ ДЛЯ ПОДКЛЮЧЕНИЯ К PROFIBUS, ДО 12 МБИТ/С, ОТВОД КАБЕЛЯ ПОД УГЛОМ 90 ГРАДУСОВ, 15.8 X 54 X 34 MM, С ВСТРОЕННЫМ ТЕРМИНАЛЬНЫМ РЕЗИСТОРОМ, С ФУНКЦИЯМИ РАЗДЕЛЕНИЯ, С ГНЕЗДОМ ДЛЯ ПОДКЛЮЧЕНИЯ ПРОГРАММАТОРА	По запросу

п»ї

DP-V1 master connection of the S7-400 to PROFIBUS
For setting up additional PROFIBUS DP lines
Communications services:
- PROFIBUSВ DP
- PG/OP communication
- S7 communication
- S5-compatible communication (SEND/RECEIVE)
Clock synchronization
Easy programming and configuration over PROFIBUS
Cross-network programming device communication through S7 routing
Can be easily integrated into the SIMATIC S7-400 system
Module replacement without PG
SIMATIC H system operation for redundant S7 communication or DP master communication
Data record routing (PROFIBUS DP)
Adding or modifying distributed I/O during operation

Note:

SIPLUS extreme products are based on SIMATIC standard products. The contents listed here were taken from the respective standard products. SIPLUSВ extreme-specific information was added.

SIPLUS CPВ 443-5-Extended	В
Article No.	6AG1 443-5DX05-4XE0
Order No. based on	6GK7В 443-5DX05-0XE0
Ambient temperature range	0В ...В +60 В°C
Conformal coating	Coating of the printed circuit boards and the electronic components
Technical specifications	The technical specifications of the standard product apply, except for the ambient conditions
Ambient conditions
Relative humidity	100%, condensation/frost permitted. No commissioning in bedewed state.
Biologically active substances, compliance with EN 60721-3-3	Class 3B2 mold and fungal spores (excluding fauna). The supplied plug covers must remain in place over the unused interfaces during operation!
Chemically active substances, compliance with EN 60721-3-3	Class 3C4 incl. salt spray in accordance with EN60068-2-52 (degree of severity 3). The supplied plug covers must remain in place over the unused interfaces during operation!
Mechanically active substances, compliance with EN 60721-3-3	Class 3S4 incl. sand, dust. The supplied plug covers must remain in place over the unused interfaces during operation!
Air pressure (depending on the highest positive temperature range specified)	1080 ...В 795 hPa (-1000 ... +2000 m) see ambient temperature range 795 ...В 658 hPa (+2000 ... +3500 m) derating 10 K 658 ...В 540 hPa (+3500 ... +5000 m) derating 20 K

Technical documentation on SIPLUS can be found here:
http://www.siemens.de/siplus-extreme