| | | | | | | |

6AG1343-1CX10-2XE0

Цена на сайте указана розничная в ЕВРО без учета НДС.
Для уточнения цены и размера предоставляемой скидки - звоните или присылайте заявки

Заказной номер

Вес

Описание продукта

Цена

п»ї

Interface for the SIMATIC S7-300 to Industrial Ethernet (not for SINUMERIK)
- 2В x RJ45 interface for 10/100В Mbit/s full/half duplex connection (with autosensing for automatic switchover and autocrossover function)
- Integral 2-port real-time switch ERTEC
- Multi-protocol operation with TCP and UDP transport protocol and PROFINET IO
- Keep Alive function
Communications services:
- Open communication (TCP/IP and UDP)
- PG/OP communication
- S7 communication (server)
- PROFINET IO device
Multicast for UDP
Remote programming and initial commissioning is possible over Industrial Ethernet
IT communication
- Web function
Integration into network management through SNMP
Configuration with STEP 7
Cross-network PG/OP communication by means of S7 routing
Diagnostics possibilities in STEP 7 and via web browser

Note:

SIPLUS extreme products are based on SIMATIC standard products. The contents listed here were taken from the respective standard products. SIPLUSВ extreme-specific information was added.

SIPLUSВ S7-300 CP 343-1 Lean	В
Article No.	6AG1343-1CX10-2XE0	6AG1343-1CX10-4XE0
BasedOn article no.	6GK7343-1CX10-0XE0
Ambient temperature range	-25В ...В +60В В°C	0В ...В +60В В°C
Conformal coating	Coating of the printed circuit boards and the electronic components
Technical data	The technical data of the standard product applies except for the ambient conditions.
Ambient conditions	В
Relative humidity	100%, condensation/frost permissible. No commissioning if condensation present.
Biologically active substances, compliance with EN 60721-3-3	Class 3B2 mold and fungal spores (excluding fauna). The supplied plug covers must remain in place over the unused interfaces during operation!
Chemically active substances, compliance with EN 60721-3-3	Class 3C4 incl. salt spray in accordance with EN60068-2-52 (degree of severity 3). The supplied plug covers must remain in place over the unused interfaces during operation!
Mechanically active substances, compliance with EN 60721-3-3	Class 3S4 incl. sand, dust. The supplied plug covers must remain in place over the unused interfaces during operation!
Air pressure (depending on the highest positive temperature range specified)	1 080В ...В 795В hPa (-1 000В ...В +2 000В m) see ambient temperature range 795В ...В 658В hPa (+2 000В ...В +3 500В m) derating 10В K 658В ...В 540В hPa (+3 500В ...В +5 000 m) derating 20В K

For technical documentation on SIPLUS, see:

http://www.siemens.com/siplus-extreme